Home / Products / Core barrels

Core barrels

Contact Us Now

+82-70-7687-0462(HotLine), +82-2-2671-2600
+82-2-2683-6733
ghlee95@gmail.com, kytjsh@empas.com

Have a Sales Contact You

Contact Us Now

+82-70-7687-0462(HotLine), +82-2-2671-2600
+82-2-2683-6733
ghlee95@gmail.com, kytjsh@empas.com

Have a Sales Contact You

SIZE

AX, BX, NX, NXD3, AS, BS, NS, NS3, HS, HS3, T76, T56

USAGE

It is a device to take the cores drilled by the core bit, and made of pipe.
Core barrels are mostly used to take the core, but sometimes they are used to increase the drilling efficiency even in case core is not needed. There are several kinds of Core Barrels in accordance with the usage;

  1. Single Tube Core Barrels : AX, BX, NX
    These are generally used to increase the collection rate of cores at an even ground.
    They cannot be used at the ground that can be easily collapsed or eroded by the circulation water.
  2. Double Tube Core Barrels : AX, BX, NX, NXD3, T76, T56
    These are made of duble tubes (Outer Tube, Inner Tube), and circulation water passes through the gap between the tubes and is not touched by the collected cores. They are not suitable to be used for the geological strata where core collection is difficult due to uneven strata with many cracks, coal beds, and soft layers. Also, they play a role to increase the core collection rate.
  3. Triple Tube Core Barrels : NS3, HS3, PS3
    Triple tube core barrels have almost same structure with Double tube core barrels, but a tube for the core case are built at inside the Inner tube.
    The Inner tube can be easily removed from a Core case tube along with the cores taken into the Inner tube.
    It is a product that is made to collect the fresh cores without disruptions from the weak grounds or broken layers where core collection is difficult with normal Double core barrels.
  4. Wire Line Core Barrels : BS, NS, HS, PS Wire line Core Barrels
    These equipment are used to hoist the rods during the drilling and core collection works by the bits of Core barrels or at time of bit changing.
    The bigger is the depth of the hoisting works, the more becomes the number of the rods and the weight of the rods as well as the cost, time, and labor of works. In order to solve the problems, Wire line core barrels have the Inner tube that is built in the Outer tube, and hoist the Inner tube onto the ground within the hole by use of wire rope. If you use this Core barrel, the number of hoisting of the Rods is reduced, and this is the most reasonable Core barrel especially for the drilling of the cores from the deep layers.
  • You may not hoist the drilling equipment except when you replace the Bits, and the drilling time is
    increased as the hoisting time and labor of the drilling equipment are saved.
  • The generations of irregular vibration of rods are less, and the fear of collapsing of the hole as well as the accident of detained rods is also less.
  • Structure : Outer Tube, Inner Tube, Over Shot, Wire Line Drill Rods, Hoisting Plugs

Features

Taesung’s Core Barrels are made of raw materials of best quality appropriate for the drilling, so they are excellent in life span and quality and currently being exported to various countries such as Kazakhstan, Mongolia, Uzbekistan etc.

HS3 Core Barrel

1 Lifting head
2 Lifting cap joint
3 Lifting Head pin
3-1 Cotter Pin
4 Lifting cap
5 Lifting cap Head pin
6 Wrench Bolt
7 Holder case
8 Holder
9 Latch spring
10 Latch
11 Latch Duplex pin
12 Lock Nut
13 Connector+Landing sholder(all-in-one)
14 Lock Nut
15 Spindle
16 Shut off valve
17 Washer
16 Shut off valve
18 Thurst cover bearing
19 Spindle Cap
19-1 Grease Fitting
20 Hanger cover bearing
21 Spring
22 Hex Nut
23 Inner Tube Cap
24 Stainless Ball
25 Ball Seed
26 Split Tube(3M)
27 Inner Tube(3M)
28 Core Lifter *Fluted / Spiral / Slotted
29 Lifter Case Connecting Cap
30 Core Lifter Case
31 Tanged Locking Coupling
32 Adapter Coupling
33 Landing Ring
34 Outer Tube(3M)
35 Inner Tube Stabilizer
36 Reaming Shells
37 Imp Core Bit

NS3 Core Barrel

1 Lifting head
2 Lifting cap joint
3 Lifting Head pin
3-1 Cotter Pin
4 Lifting cap
5 Lifting cap Head pin
6 Wrench Bolt
7 Holder case
8 Holder
9 Latch spring
10 Latch
11 Latch Duplex pin
12 Lock Nut
13 Connector+Landing sholder(all-in-one)
14 Lock Nut
15 Spindle
16 Shut off valve
17 Washer
18 Thurst cover bearing
19 Spindle Cap
20 Hanger cover bearing
21 Washer
22 Hex Nut
23 Inner Tube Cap
24 Stainless Ball
25 Ball Seed
26 Split Tube(3M)
27 Inner Tube(3M)
28 Core Lifter
29 Core Lifter Case
30 Tanged Locking Coupling
31 Adapter Coupling
32 Landing Ring
33 Outer Tube(3M)
34 Inner Tube Stabilizer
35 Reaming Shells
36 Imp Core Bit